Stone for fountains, water features & water walls
Random or cut flagstone for pool surrounds, patios, and walkways. Tumbled travertine, quartzite, and limestone. Slip-resistant finishes standard.
Request This Material →Browse water feature stone
All stone sourced from quarries in Mexico · Per project request · 4–8 week lead time for Southern California projects
Fuente de Caballos
Hand-carved cantera stone horse fountain from Jalisco, Mexico. A statement piece for courtyards and garden entryways.
Fuente Típica Mexicana
Traditional tiered Mexican fountain in hand-carved cantera stone. Available in multiple sizes for patios and pool surrounds.
Mexican Stone Fountain
Artisan cantera stone fountain sourced from Jalisco. Each piece is unique, carved to order. Ships in 4–6 weeks.
Common questions about natural flagstone paving
From stone origin and material selection to installation requirements and maintenance.
What flagstone is best for pool decks in Southern California?▼
Tumbled travertine is most popular for SoCal pool decks, stays cool underfoot, has natural slip-resistant texture, and handles heat and chlorine well. Quartzite is more durable but harder to cut. Limestone is a reliable middle ground.
Where does NexaBuilder flagstone come from?▼
Flagstone is sourced from quarries in Queretaro and Jalisco, Mexico, known for warm ivory and walnut-toned travertine. Stone is selected for consistent 1.25 to 1.5 inch thickness to simplify installation.
Should flagstone be mortar-set or sand-set?▼
For permanent applications like pool decks and patios, mortar-set on a concrete slab is standard. Sand-set works for low-traffic garden paths. In Southern California, mortar-set with polymeric joint sand is most common.
How is irregular flagstone cut?▼
With an angle grinder and diamond blade for straight cuts, or scribed and split with a stone chisel and mash hammer for organic shapes. Always wet-cut to control crystalline silica dust.
Does flagstone need to be sealed?▼
Yes. A penetrating impregnator sealer applied annually prevents staining from sunscreen, pool chemicals, and hard water deposits. Color-enhancing sealer provides a deeper wet-look finish.
Get a quote for your Southern California project →
Installation & Finishing Guide
Materials, methods, finishing products, tools, and pricing guidance for flagstone paving installation in Southern California.
Structural & Setting Requirements
Flagstone paving on a mortar bed requires 4-inch compacted base, 2-inch sand setting bed, and mortar joints of 1:4 Type S mix. Irregular flagstone is hand-fit and scribed. For sand-set flagstone, polymeric sand is swept into joints and activated with water. Penetrating impregnator sealer applied annually.
Standard setting mortar: Type S masonry cement + washed plaster sand (1:3 ratio). For wet areas and pools: white latex-modified thin-set. Never use pre-mixed mastic in wet or exterior applications.
Natural stone is heavy. Calculate dead load per square foot: cantera avg 12–14 lbs/ft², travertine 13–15 lbs/ft², quartzite 16–18 lbs/ft². Submit loads to structural engineer for any overhead or load-bearing applications.
For any wet-area application, apply crystalline waterproofing membrane (XYPEX, Kryton, or equivalent) to substrate before stone setting. Two coats at 90° to each other. Allow full cure before setting stone.
Cleaning, Sealing & Enhancement
After mortar cure (72 hrs), clean with pH-neutral stone-safe cleaner. Remove grout haze with manufacturer-recommended haze remover — not muriatic acid, which damages porous stone. Rinse thoroughly.
Apply penetrating impregnator sealer (silane/siloxane blend) after cleaning and full cure. Exterior: StoneTech BulletProof or equivalent. Pool-adjacent: chlorine-resistant formula. Re-seal every 1–3 years.
For color enhancement (wet-look or natural finish), use enhancer + sealer combo product. Test on back of sample piece first — some stones will darken significantly. Enhancement is permanent.
pH-neutral cleaner only for daily cleaning. No vinegar, bleach, or citrus. For stain removal, use stone poultice appropriate to stain type (oil, rust, organic). Re-seal on schedule. Inspect joints annually.
Tools & Jobsite Equipment
- Angle grinder with 4″ diamond blade
- Wet tile saw with diamond blade (7″–10″)
- Hand-held circular saw with segmented diamond blade
- Stone chisel set + 3 lb mash hammer
- Bull-nose router bit (for edge profiles)
- Laser level (rotary, self-leveling)
- 4’ and 6’ bubble level
- Rubber mallet + wooden beating block
- Notched trowel (1/2″ square-notch for thick-set)
- Suction cup lifters (for large slabs)
- Stone spacers (3/8″ and 1/2″)
- Grout float (for wide joints)
- Grout bag + nozzle (for raked joints)
- Sponges + 5-gal buckets
- Caulk gun (for silicone joints)
- Painter’s tape (protect stone from mortar drips)
- Stone dolly / panel cart (for heavy slabs)
- Mortar mixer (drum or paddle)
- Scaffolding or pump jack (elevated work)
- Vacuum + HEPA filter (silica dust control)
- PPE: N95 respirator, safety glasses, cut-resistant gloves
Cutting dry stone generates crystalline silica dust — a known carcinogen causing silicosis. Always wet-cut or use vacuum dust collection. Never dry-cut cantera or travertine without N95 minimum respiratory protection.
Pricing a Flagstone Paving Job
All stone is sourced and imported from Mexico per project. Lead time is typically 4–8 weeks from order confirmation. Do not schedule installation without confirmed delivery date and full material inspection on arrival.
Order 10–15% overage on all stone — breakage, cuts, and pattern matching demand extra material. Once a lot leaves the quarry, matching is nearly impossible. Leftover stone has resale value; short material stalls the project.
Include in your bid: substrate prep, waterproofing, structural steel (if required), mortar and grout materials, sealer, equipment rental, and disposal. Stone is often 40–60% of project cost.
Always inspect stone in person before full order — photos don’t capture variation, color, or finish accurately. Request samples of the actual lot. Verify dimensions are exact before cutting begins.
Ready to order flagstone paving?
All stone is sourced per project from Mexico. Request a quote and we’ll match you with a CSLB-verified stone contractor and confirm material availability.
Request Custom Stone →Gallery image coming soon